If you ran out of heating oil, call your oil supplier for a delivery, turn the burner’s power switch off until the oil arrives, and plan on the burner needing attention before it will start again. Running a tank dry lets air into the fuel line, and the burner often won’t light until that air is bled out. Many homes in the Poconos heat with oil, and Noble’s Heating & Cooling restarts oil furnaces and boilers from Saylorsburg to Stroudsburg and across the Lehigh Valley every winter. Here’s what to do, step by step, and how to keep it from happening again.

Step 1: Make Sure the Tank Is Really Empty

Most oil tanks have a float gauge on top, a small clear tube with a marker that reads like a car’s fuel gauge. If the marker is sitting at the bottom, you’re likely out. Gauges can stick, so think back to your last delivery as well. A burner that runs for a few seconds and then shuts off, with a red reset light on, is another common sign of a dry tank.

If the gauge shows plenty of oil, the problem is something else. Our post on what to check when a furnace won’t turn on covers the other common causes.

Step 2: Call for a Delivery

Call your oil supplier first and ask about the soonest delivery they can make. Cold snaps and holiday weeks are their busiest times, so call as early in the day as you can. Let them know the tank is completely empty.

If paying for a delivery is the hard part, Pennsylvania’s Low-Income Home Energy Assistance Program (LIHEAP) offers crisis grants to eligible households that are out of fuel or running low. The 2026-27 season is open now and runs through April 23, 2027.

Step 3: Turn the Burner Off Until the Oil Arrives

Switch the burner off at its power switch. On many oil systems this is a switch with a red cover plate, often at the top of the basement stairs or on the wall near the furnace or boiler. With the switch off, the burner won’t keep trying to start on an empty tank while you wait. Turn it back on after the delivery, not before.

Step 4: Expect the Burner to Need Bleeding

When a tank runs dry, the fuel pump on the burner pulls in air instead of oil. Oil burners need a steady, air-free supply of oil to light, so even after a delivery the burner may run, fail to light and lock out. Getting it going again means bleeding the air out of the pump and fuel line.

A dry tank can also stir up sludge and water that settle at the bottom of every oil tank over the years. That sediment can be drawn into the fuel filter and the nozzle, which is why a burner sometimes starts after a delivery and then quits again a day or two later. When we restart a burner after a run-out, we check the filter and nozzle while we’re there.

The One-Press Rule

The red reset button on an oil burner is a safety control, not an on switch. After the delivery, with the power switch back on, you can press it once. If the burner starts and stays running, good. If it doesn’t, please don’t press it again. Each press sprays oil into the combustion chamber, and if the burner doesn’t light, that oil stays there. Several presses can leave enough oil to ignite all at once when the burner finally fires. One press, then call us.

How to Keep It From Happening Again

  • Ask about automatic delivery. Most oil suppliers can track your usage against the weather and deliver before you run low.
  • Check the gauge during cold snaps. A furnace or boiler burns much more oil in a cold week than in a mild one.
  • Keep the fill pipe clear. Shovel a path to the fill and vent pipes after a snowstorm so the driver can reach them.
  • Watch vacation homes closely. An empty house can run out without anyone noticing. Our post on heating a vacation home in winter covers alerts and other safeguards.
  • Service the burner every year. A yearly tune-up covers the nozzle, fuel filter, pump and safety controls, so the burner is in good shape when it matters.

We Know Oil Heat

Oil heat is common in older homes across our area, and keeping it running well is a big part of what we do. Keith is factory trained by Beckett, a major oil burner manufacturer. Learn more about our furnace and boiler services, or call Noble’s Heating & Cooling at 484-860-2055. We take calls after hours, and a home without heat in freezing weather always gets our first attention.